BushcraftZ 2014 |
This iPad carry bag was inspired by my current zendoodle
obsession. It is easy to make and accommodating to any doodle- inspiration one
might have.
Materials:
- The amount of fabric needed depends on the size of the iPad. For my iPad Air I used to following measurements. If your iPad is larger or smaller these measurements can be adjusted.
- 1 x 31cm x 25cm white cotton for the front panel
- 1 x 31cm x 25cm pattern cotton for the back panel
- 2 x 31cm x 25cm patterned cotton for the inner lining
- 2 x 31cm x 25cm clear plastic table cloth cover for the outside layer (optional)
- 1x 30 cm long zip
- 2 x 50cm braid for the handle
- Fine permanent marker
- General sewing supplies
- Owl pattern (Optional) or doodle you own design)
Method:
- Draw the doodle onto the white cotton fabric with a
permanent marker to make to from panel.
BushcraftZ 2014 - If you are using the plastic lining place the plastic lining on the right side of the front and back cover and treat and one.
- Insert the zip between the front and back panels as follows:
Place right sides of the front panel and the lining together. Place the zip
between the two , ensure that the zip is facing the front panel and sew the zip in place with a zipper foot. Turn
fabric to have the right sides facing. Repeat for the back panel. The back and front
panels should now be attached with the zipper.
BushcraftZ 2014 - With the right sides together align the edges carefully and open the zip slightly. Sew along the open edges. Turn right side out. Press seams and corners.
- Attach the braid onto the front and back panels to make the handles.
No comments:
Post a Comment